Posts in Category: technology

EQO2

On December 5, 2018 by Steven Morgan With 0 Comments - technology
Working in places such as oil rigs can be hugely dangerous. These are places that require a lot of concentration. Workers need to be at their best at all times. They serve a specific and necessary purpose in society that makes societies better and more functional. They also provide the kind of help that other companies need in order to be assured of success in the workforce. Many problems can arise under these working conditions. People need to be vigilant at all times in order to prevent issues and make sure the workplace remains safe for themselves and all others they work with each time. This means that each person at the workplace must be fully aware of what needs to be done in order to prevent any further problems. Fortunately, there are many tools at their disposal that make it possible to make sure that any workplace remains as safe as possible under all conditions.
Explosions can be a particularly dangerous problem. Explosions may result in immediate harm to people as well as to the oil rig or other place. People and companies today need to take as many positive steps as they can in order to head off such problems and make sure there is never a risk of any kind of explosion on the job. They also need to make sure they have the tools on site in order to help monitor any kind of possible risk. Today’s tools make it possible to help ward off such problems and to reduce the possibility that it will happen at all. This is why so many companies have chosen to rely on such technology right now for their modern workforce today. They know it will offer the kind of results they really need to keep explosions at bay in every possible way. Find more information about EQO2 at http://www.equivital.com/products/tnr/sense-and-transmit

Heat Pump Cambridge

On November 8, 2018 by Steven Morgan With 0 Comments - technology

Your Cambridge home needs a heat pump, only you don’t know where you can get a reliable expert to provide and install one. There are many companies that sell heat pumps and other heating and cooling solutions in Cambridge but you cannot afford to go with the first one that you come across. So what should you be looking for? Here are a few tips:
• The company you choose should have extensive experience in heat pumps. They should know all about the different kinds of heat pumps that are available in the market, how they work and what they are best suited for. If you call a company and they give you a quote before they have come and made an assessment they are probably not very good – how can they possibly know what the specific heating and cooling needs for your home are?
• Make sure that you are dealing with a company that supplies the highest quality of units. They should sell units from the best manufacturers, and anything that you buy from them should come with a solid warranty for the unit and also for the installation.
• Your heat pump will need to be maintained, so when you are looking around for a heat pump company you should find one that does installation, maintenance and repair too. Since they did the installation they will have an easy time doing maintenance in the future and your system should experience fewer problems if any.
• While price is important it shouldn’t be your guiding factor – look at the quality of the heat pump you are getting, rather than buying one because it is cheap.
The Cambridge Renewable Energy Centre is one of the best when it comes to heat pumps. You can contact them through their website, http://cambridgeenergycentre.co.uk/.

Air Source Heat Pump Air Conditioning

On October 4, 2018 by Steven Morgan With 0 Comments - technology

Your regular AC unit has been failing and you are wondering whether you should invest in an air source heat pump. Many people, especially the older generation, think that the only way they can run an air conditioner is through electricity, oil or gas and so are sceptical when it comes to air source heat pumps. You shouldn’t be – these air conditioning systems come with several unbeatable benefits.
The first is that you will be able to reduce your utility bills substantially. An air source heat pump works by harvesting warm or cold air around the house depending on the weather – in the winter it harvests warm air and in the summer hot air – and pumping it back into the home. You will need a little electricity to run the system but nothing compared to how much you would use if your whole AC system was running on the conventional grid. In fact, if you have been keen to reduce your carbon footprint this is is a great way to do it. If you don’t want your air source heat pump hooked up on the electricity grid you can power it using power or solar.
The other benefit of an air source heat pump is that you can heat your home or office in extremely cold conditions. These systems work in temperatures as low as -20C. True, they usually require bigger radiators, but this is a small cost compared to the benefits that you reap. These pumps are able to heat water which can stay hot for long periods of time.
If you want to get the most out of your air source heat pump it is recommended that you find the best installer for it. In Cambridge, that happens to be Elliots. You can find out how to get in touch with them on http://cambridgeenergycentre.co.uk/.

Metal Etching

On September 8, 2017 by Steven Morgan With 0 Comments - technology

You are starting a small manufacturing plant and need to have metal etched for several of your machines. There are two ways that you can do it – you can choose hard tooling, which is a process that uses hard tools and lots of force to produce parts, or you can use photo etching which is a much more reliable and precise method. Here is why:

• Whether you are etching parts big or small you can be sure that you can achieve high accuracy with photo etching. It is very precise even when working with very thin metal sheets. You can be sure that every part that you have photo etches will fit perfectly into the equipment. You can also have spares etches in case you need them in the future.

• Photo etching is great for businesses that are starting out because it is an inexpensive process. Since it is easy and cheap to set up the cost savings will be passed on to you. In addition to that it can be used to produce one part or a million – you will only have to etch the number of parts that you need.

• Photo etching is a time saving process – it takes a short time to get parts that are ready to use. The metal is cleaned and then etched and there are no burrs, which means no time is spent on the de-burring process.

• Photo etching doesn’t compromise the quality of the metal in any way unlike hard tooling which tends to leave metal prone to cracks and tears.

It is recommended that you hire Qualitetch to do your photo etching. They are a UK company that have been etching metal for more than 25 years and they are known for producing superior parts.